The purpose of this
page is to help those who are fortunate enough to
own one of these fine old machines with any information we can gather. I will be
providing sources for spare parts, relevant email addresses, phone numbers,
lists of fellow Kaw dirt enthusiasts plus links to bulletin boards and other web
sites. We want also to display pictures of fellow restorers Kawasaki dirt bike
projects, as well as provide a forum for exchanging ideas, tips techno info and
parts. In short, anything to do with these wonderful green machines can be left
here or found here .
(((CLICK
HERE)))TO SEE EDINBURG KAWASAKI TRIALS PROTOTYPE ARTICLE.
(((click here)))FOR KT330 PHOTO IF YOU HAVE ANY INFO OR
PICTURES OF OR OWN ONE OF THESE I WANT TO HEAR FROM YOU! email me at
kt250@cillnet.com
(a special thanks to Kim&Toni Nelson for sending this in)
Michael Moore's kt250 exhaust project(((CLICK HERE)))
a special thanks to Michael Moore for all his KT R&D work!. MAY 1975 POPULAR CYCLING KT TEST(((CLICK HERE))) a special
thanks to Clint Pulliam aka (www.motolane.com)for sending this in. JULY 77 CYCLE GUIDE BIG BORE KT ARTICLE(((CLICK HERE))) a
special thanks to Michael Moore for sending this in. MARCH75 CYCLE GUIDE KT250 ARTICLE(((CLICK HERE))) 75 CYCLE WORLD KT250 ROAD TEST(((CLICK HERE)))
first kawasaki backed prototype trials
72kt450
((click
here)) prototype article. click
thumbnails for larger picture Subject: Connector,air cleaner& machined gas
cap for kt&kx (NOTE FROM WEBMASTER) I JUST RECIEVED 3 OF THESE NEW AIRBOX
CONNECTORS FROM FRED THEY LOOK GREAT! THANKS FOR THE GOOD WORK FRED! also i am
sending Fred a N.O.S. kt handlebars he is going to have them reproduced by the
same place that made these airbox connectors.how many of you could use a new set
of actual kt bars?? AIR BOX CONNECTORS NOW
FINISHED That long standing problem of split connectors from airbox to
carb(part no 11026-013) has finally BEEN SOLVEDThe estimated cost is US $20 per
connector,plus postage. new machined gas caps approx US $25 per cap. regards,
Fred (((CLICK HERE))) TO EMAIL FRED
"This article is used by permission.
Copyright 2002, Mondo Communications and Cobalt Blue Publications. Visit our web
site at www.vmx-mag.com for more information."
click
images to see larger version (a special thanks to Miyoshi Masaharu for sending
this in.) DIRT BIKE 78KX250A4 ARTICLE(((CLICK HERE)))
a special thanks to DAN(the man)WOLLIN for sending this in.
M.X.A.78KX250A4 ARTICLE(((CLICK HERE)))
a special thanks to DAN(the man)WOLLIN for sending this in.
CYCLE MAGAZINE 78KX250A4 ARTICLE(((CLICK HERE))) a special
thanks to Clint Pulliam aka (www.motolane.com)for sending this in.
CYCLE GUIDE MAGAZINE 78KX250A4 ARTICLE(((CLICK HERE))) a special
thanks to Garry Wilamson for sending this in.
M.X.A.79KX250A5 ARTICLE(((CLICK HERE))) a special
thanks to DAN(the man)WOLLIN for sending this in.
NIGHT MARE
RACING SOURCE FOR A4 & A5 SIDE PLATES FENDERS COMEING SOON.
i will get all old messages off this old board for future reference for
all to see but it will put out of service as of the last of december.i will keep
and use the NEW SWAPMEET ^
need cables?I recently talket to Elysia at terry
cable about getting new cables for KTs &KXs terry cable is listed in the
links section here is elysia's reply :Yes, we can copy these cables. They will
each cost 15.87 for black or 21.98 for braided stainless steel. You can mail
them to attn: Elysia at TERRYCABLE, 17376 Eucalyptus St., Hesperia, Ca 92345
along with your name address, phone number and a note that says copy these .
Thanks, Elysia 1-800-854-4691
need brake shoes? try dennis kirk co. listed in the links
section for the kt 250 trials there catalog # is 19-1321 front and 19-1322 for
rear they are vesrah kevlar shoes i use them they work great!
need clutch plates for your kt 250?dennis kirk co has them
catalog#38-596 this is a 5 piece friction set i use them they work great!
(please email me your
scans&text!!)
AL
swing arms for vintage KX and others now available from VMXpert.
dennis
kirk co.will send you a free catalouge with some kt parts in
it
kt250
assembyl&prep manual
kt250 parts manual
kt250 shop manual
Michael Moore's kt250 exhaust project(((CLICK HERE)))
a special thanks to Michael Moore for all his KT R&D work!.
click
thumbnails for larger picture Subject: Connector,air cleaner& machined gas
cap for kt&kx (NOTE FROM WEBMASTER) I JUST RECIEVED 3 OF THESE NEW AIRBOX
CONNECTORS FROM FRED THEY LOOK GREAT! THANKS FOR THE GOOD WORK FRED! also i am
sending Fred a N.O.S. kt handlebars he is going to have them reproduced by the
same place that made these airbox connectors.how many of you could use a new set
of actual kt bars?? AIR BOX CONNECTORS NOW
FINISHED That long standing problem of split connectors from airbox to
carb(part no 11026-013) has finally BEEN SOLVEDThe estimated cost is US $20 per
connector,plus postage. new machined gas caps approx US $25 per cap. regards,
Fred (((CLICK HERE))) TO EMAIL FRED
REPRODUCTION KT250 FORK WIPERS NOW AVAILABLE from
Vintage Performance Rubber Products 3 Otis Road Somersworth NH 03878
603-692-2226 (((click here))) to
see VINTAGE PERFORMANCE!! WEB PAGE 
76kx250-a3 shop manual
76kx400-A2 shop manual
kx400
parts catalog
kx125 shop manual.......
CENTURIAN shop manual
KX 250
A4 assembyl&prep manual
click
images to see larger version (a special thanks to Miyoshi Masaharu for sending
this in.)
(((CLICK HERE)))
a special thanks to DAN(the man)WOLLIN for sending this in.
(((CLICK HERE)))
a special thanks to DAN(the man)WOLLIN for sending this in.
NIGHT MARE
RACING SOURCE FOR A4 & A5 SIDE PLATES FENDERS COMEING SOON.
FRONT&BACK
A4/A5 fenders 
stock f
fender on L new reproduction on R also comeing TANKS & other vintage
KAWASAKI & MAICO STUFF. 
to go to new swapmeet/gallery/chat/discussion
bulletinboard.
AL
swing arms for vintage KX and others now available from VMXpert.
