The purpose of this
page is to help those who are fortunate enough to
own one of these fine old machines with any information we can gather. I will be
providing sources for spare parts, relevant email addresses, phone numbers,
lists of fellow Kaw dirt enthusiasts plus links to bulletin boards and other web
sites. We want also to display pictures of fellow restorers Kawasaki dirt bike
projects, as well as provide a forum for exchanging ideas, tips techno info and
parts. In short, anything to do with these wonderful green machines can be left
here or found here .
(a special thanks to Kim&Toni Nelson for sending this in)
Michael Moore's kt250 exhaust project(((CLICK
HERE))) a special thanks to Michael Moore for all his KT R&D work!. MAY 1975 POPULAR CYCLING KT TEST(((CLICK
HERE))) a special thanks to Clint Pulliam aka (www.motolane.com)for sending
this in. JULY 77 CYCLE GUIDE BIG BORE KT ARTICLE(((CLICK HERE))) a
special thanks to Michael Moore for sending this in. MARCH75 CYCLE GUIDE KT250 ARTICLE(((CLICK
HERE))) 75 CYCLE WORLD KT250 ROAD TEST(((CLICK HERE)))
first kawasaki backed prototype trials
here)) prototype article. click thumbnails for
larger picture Subject: Connector,air cleaner& machined gas cap for
kt&kx (NOTE FROM WEBMASTER) I JUST RECIEVED 3 OF THESE NEW AIRBOX CONNECTORS
FROM FRED THEY LOOK GREAT! THANKS FOR THE GOOD WORK FRED! also i am sending Fred
a N.O.S. kt handlebars he is going to have them reproduced by the same place
that made these airbox connectors.how many of you could use a new set of actual
kt bars?? AIR BOX CONNECTORS NOW FINISHED That
long standing problem of split connectors from airbox to carb(part no 11026-013)
has finally BEEN SOLVEDThe estimated cost is US $20 per connector,plus postage.
new machined gas caps approx US $25 per cap. regards, Fred (((CLICK HERE))) TO EMAIL FRED
need cables?I recently talket to Elysia at terry
cable about getting new cables for KTs &KXs terry cable is listed in the
links section here is elysia's reply :Yes, we can copy these cables. They will
each cost 15.87 for black or 21.98 for braided stainless steel. You can mail
them to attn: Elysia at TERRYCABLE, 17376 Eucalyptus St., Hesperia, Ca 92345
along with your name address, phone number and a note that says copy these .
Thanks, Elysia 1-800-854-4691
need brake shoes? try dennis kirk co. listed in the links
section for the kt 250 trials there catalog # is 19-1321 front and 19-1322 for
rear they are vesrah kevlar shoes i use them they work great!
need clutch plates for your kt 250?dennis kirk co has them
catalog#38-596 this is a 5 piece friction set i use them they work great!
(please email me your
AL swing arms for
vintage KX and others now available from VMXpert.